• Analysis and Comparison of Traffic Calming Methods, Traffic Calming Strategies and Tools 

  Vatandost, Akbar (PenPub, 2025-03-01)

  Traffic calming programs, as the name suggests, are attempts to reduce vehicle speeds and reduce traffic volume. Therefore, there are several goals that are usually specified for programs. These include: Slow traffic speeds; ...

  ---

• Comparing the Seismic Collapse Capacity of Steel Moment Resisting Frames with Inclined Columns 

  Mehdizadeh, Kourosh؛ Sadeghi, Abbasali؛ Sadeghi, Amirreza؛ Razmkhah, Mohammad Hossein (PenPub, 2025-03-01)

  Due to some constructional and architectural issues, the columns of the structure, which play the main load-bearing role in it to transfer imposed loads to foundation, may be forced out of their upright position and run ...

  ---

• Feasibility Analysis of Partial Replacement of Coarse and Fine Aggregates by Waste Steel Slag in Concrete Interlocking Paving Blocks 

  Gunathilaka, Nadira؛ Karunananda, Kamal؛ Yaddehige, Chathura (PenPub, 2025-12-01)

  Reinforcement steel manufacturing is an important industrial process relevant to the construction industry as reinforcements are essential products for civil engineering constructions in the present context. Steel slag is ...

  ---

• Seismic Performance Evaluation of Mid-Rise Concrete Buildings Equipped with Lead Rubber Bearings Using Fragility Curves 

  haseli, behzad؛ Mozafarpour Taromi, Mohammad Reza (PenPub, 2025-12-01)

  This study evaluates the seismic performance of mid-rise concrete moment-resisting frames (MRFs) equipped with lead rubber bearings (LRBs) using fragility curves. Two concrete buildings (8- and 12-story) were designed with ...

  ---

• Lateral Formwork Pressure in self-compacting Concrete: A Review on Models 

  motaghed, sasan؛ Ozanzadeh, fereshteh؛ asghari, amin (PenPub, 2025-12-01)

  Self-compacting concrete (SCC) has revolutionized concrete technology by enhancing construction efficiency and quality through its ability to flow and consolidate without mechanical vibration. This paper reviews various ...

  ---

• Evaluation of Traffic Parameters in the Presence of Traffic Speed Bumps on Urban Routes 

  Vatandost, Akbar؛ Rasooli, Ahmad (PenPub, 2025-12-01)

  If the driver drives slightly faster than the speed limit, the speed bump causes a gentle jolt to the car. In a situation where the car crosses the speed bump at a dangerous speed, the obstacle causes a severe jolt to the ...

  ---

• Development and Characterization of SBS-Modified Bitumen for Compliance with Standards in South Asian Pavement Engineering 

  Islam, Md Jahidul (PenPub, 2025-12-01)

  This research investigates the development of Polymer Modified Bitumen (PMB) to meet PG 76-18 specifications, essential for durable pavements in South Asian climates. The study evaluates the properties of raw 60/70 grade ...

  ---

• Evaluating Domestic Wastewater Quality in Khulna City Using Correlation Analysis between Electrical Conductivity and Total Dissolved Solids 

  Biswas, Avizit؛ Awal, Mohammad Abdul؛ Nabi, Md. Mahmudun؛ Ray, Saurav؛ Chakrobortty, Arindam (PenPub, 2024-09-01)

  Effective wastewater management is essential for protecting the environment and ensuring public health. Untreated or badly treated wastewater can severely pollute water bodies and soil, potentially spreading diseases and ...

  ---

• Partial Replacement of Fine Aggregates by Lathe Waste in Concrete Interlocking Paving Blocks to Improve Desired Structural Characteristics 

  Gunathilaka, Nadira؛ Mohamed, Shaheen (PenPub, 2024-09-01)

  Turning, milling, drilling, grinding and boring operations using lathe and other types of CNC machines are essential manufacturing processes of most steel or any other alloy related production works. Due to the above ...

  ---

• Macroscopic Traffic Flow Modeling (Case Study In Bahir dar city at Selected Road Segments) 

  Andargie, Daniel؛ Abedela, Nurhussien (PenPub, 2024-09-01)

  The goal of this paper is to explore the characteristics of road segments by developing a model that will enable scientifically descriptive estimator of macroscopic traffic flow parameters and the relationship between them ...

  ---

• An Optimization Model in Commodity Mode Choice Transportation System 

  Rasooli, Ahmad؛ Salsabilian, Amirhossein؛ Akbari, Sadegh (PenPub, 2024-09-01)

  the research method and algorithm used in this study were able to achieve significant results. The proposed model is not only theoretically strong and reliable, but also in practice it has been able to show better performance ...

  ---

• Investigating the Pattern of Plastic Hinge Formation in Steel Moment Frames Under Near-Field and Far-Field Earthquakes 

  Estakhri, Mohammad Saleh؛ Nikkhoo, Ali (PenPub, 2024-06-01)

  This study, after modeling three types of 3, 5 and 8-story frames with 2, 3 and 4 spans by Sap2000 using two categories of earthquake records of far and near-field for different levels of PGA, the process of forming plastic ...

  ---

• Effect of using CFRP on the Bearing Capacity of Defected Four-Angle Ateel Composite Columns 

  Hossein Abadi, Davoud؛ Narmashiri, Kambiz (PenPub, 2024-09-01)

  The main goal of the current research is to study the strengthening of defected four angle steel composite columns using carbon fiber reinforced polymer (CFRP). Therefore, using numerical studies carried by Abaqus, 19 ...

  ---

• Fracture Toughness Evaluation of Asphalt Mixtures Containing Rubber Powder and Steel Slag at Low Temperature 

  Shabani, Shahin؛ Salsabilian, Amirhossein؛ Akbari, Asghar (PenPub, 2024-06-01)

  Pavements are part of the most important structure of the roads and a huge amount of money is spent on their repair and improvement every year. If special measures are used in the mixing plan of these procedures, most of ...

  ---

• Effect of Different Admixtures on Mechanical Properties of Concrete Paving Block: A Comparative Study 

  Abir, Asif Hossain؛ Sarker, Md. Akhter Hossain (PenPub, 2024-06-01)

  Ever since their introduction nearly a century ago, concrete paving blocks have become increasingly common. They evolved into an alternative to burned clay brick and natural stone. Concrete paving blocks are used to lay ...

  ---

• Comparative Analysis of Concrete Compressive Strength using a Destructive Compression method and Non-destructive Rebound Hammer. 

  Mulira, Alex Ssenyondo؛ Kiguli, Albert Valentine؛ Rucukye, Anthony؛ Matovu, Moses (PenPub, 2024-06-01)

  Assessment of concrete compressive strength is important in ensuring structural integrity and durability of concrete structures. Traditionally, destructive testing methods using compression machines have been the standard ...

  ---

• A Survey of Development on the Analysis Methods and the Theories of Shells 

  Majidpourkhoei, Ali (PenPub, 2024-06-01)

  Shells are the most widely used structural elements forming roofs of buildings and other structures for supporting loads to its surface. There are many types of shell forms that can be made and practical. The most common ...

  ---

• Simulation and Numerical Analysis of the Explosion Effect on the Body of an Earthen Dam in the Injection Gallery 

  kamran, Hassan؛ Komasi, Mehdi (PenPub, 2024-01-01)

  This article focuses on modeling and numerical analysis of the effects of an explosion on the body of an earthen dam in an injection gallery. Earthen dams are crucial for water supply, electricity generation, and flood ...

  ---

• Mechanical Characteristics of Hardened Concrete with Different Types of Cement and Aggregate Available in Bangladesh 

  Abir, Asif Hossain (PenPub, 2024-01-01)

  This paper presents the results of an investigation into the influence of aggregate and binding material type on the mechanical properties of hardened concrete. To perform this investigation, four different types of coarse ...

  ---

• Modeling of Backward Elimination in Order to Estimate Demand in Rural Areas (Case Study: Qazvin Villages) 

  Afandizadeh, Shahriar؛ Bigdeli Rad, Hamid؛ Bigdeli Rad, Vahid؛ Absari, Fatemeh (PenPub, 2024-01-01)

  In any transportation planning, including rural transportation, the characteristics of existing supply and demand must be identified. According to this knowledge, the main needs and problems of the villagers in the field ...

  ---

View more