Volume 6, Issue 3
مرور بر اساس
ارسال های اخیر
-
Optimization of 5-Component Fibers and Glass Fibers in Asphalt Mixtures Based on Functional Characteristics
(PenPub, 2022-09-01)Nowadays, due to the increase in the amount of traffic and the number of axles, the use of additives in asphalt concrete has become common. In recent decades, one of the goals of engineers in asphalt technology has been ...
-
Strength and Durability Performance of Mortars Incorporating Calcined Clay as Pozzolan in Comparison with silica fume
(PenPub, 2022-09-01)The use of low-grade calcined clays is the only potential material available in large quantities to meet the requirements of eco-efficient supplementary cementitious materials by decreasing the clinker content in blended ...
-
Experimental Investigation on Hydrophobic Treatment of Cement Concrete with Organosilane Based Compound
(PenPub, 2022-09-01)Concrete is the most widely used construction material owing to its good strength, mouldability and robustness. However, its durability has always been a cause of concern arising mainly due to the fact that concrete is ...
-
Statistical Analysis of b-value Parameter under Unconfined Uni-axial Compression Testing
(PenPub, 2022-09-01)In this paper, statistical analysis of Acoustic Emission (AE) based b-value parameter has been carried out. In the initial phase, multi-linear regression was carried out on AE parameters released during uniaxial compression ...
-
Functional Properties Analysis of SMA Asphalt Mixtures Containing Rubber Powder and rPET
(PenPub, 2022-09-01)SMA asphalt mixtures are one of the asphalt mixtures known so far. In these mixtures, the load transfer and degradation process takes place through the direct contact of stone on stone. In these mixtures, like other asphalt ...



