An AM30 magnesium alloy was processed through ECAP method at 200 °C. Optical and transmission electron microscopy as well as electron back scattered diffraction (EBSD) technique were employed to characterize the deformed ...

In this paper, 2wt.% Fe doped TiO2 nanopowder was prepared by a combination of sol-gel and mechanical alloying methods. The mechanical alloying of Fe powder with Ti(OH)4 gel produced from the sol-gel ...

In this study, mechanical alloying was done by a high-energy planetary ball milling technique. A mixture of NiO, MoO3 and graphite powders were used as initial materials. After milling of powder mixture with 40 ...

Effects of different amounts of lead (Pb) and tin (Sn) on microstructure and tensile properties of the AZ91 alloy were studied. The results presented that the microstructure of AZ91 alloy is consisted the α-Mg phase and ...

Recently, high-performance lightweight materials with outstanding mechanical properties have opened up their way to some sophisticated industrial applications. As one of these systems, aluminum matrix composites/nanocomposites ...

In this study, the effect of slip casting parameters on the ultrafine microstructure and the density of pore-free YAG ceramic was evaluated. A stable, high concentrated aqueous YAG slurry using Dolapix-CE64 as a dispersant ...

A mixture of 10 wt% CuO-10 wt% Fe2O3 supported on cordierite were prepared by wet impregnation. The as-prepared solids doped with Li2O (0.75-3 mol %) were calcined at 500-900 ºC. ...