In recent years, great attention has been paid to the development of high manganese austenitic TWIP steels exhibiting high tensile strength and exceptional total elongation. Due to low stacking fault energy (SFE), cross ...

In this study, the effect of cryogenic treatment on microstructure, hardness and wear behavior of cold work tool steel containing 5 wt. % Cr used in the production of cold rollers was investigated. For this purpose, the ...

The aim of the present research is to simulate the heat treatment process of the autogenous grinding (AG) shell liner of Cr-Mo steel in different quenching media (still air, air blowing, oil and water) using ABAQUS software, ...

In this study, the hot deformation processing map of AISI 304 austenitic stainless steel in two initial grain sizes of 15 and 40 μm was investigated. For this purpose, cylindrical samples were used in the hot compression ...

The effect of microstructural refinement and intercritical annealing on the mechanical properties and work-hardening response of a low carbon St12 steel was studied. It was revealed that intercritical annealing of the ...

In this paper, an advanced thermo-mechanical treatment was conducted on AISI 316 austenitic stainless steel. At first, three samples were rolled at the ambient temperature, the temperature of -20 ºC (dry ice and ethanol) ...

This paper reports on the precipitation behaviour and microstructural evolution in ~20% cold rolled NbMoV and V single microalloyed low carbon steels during intercritical annealing. The microstructure and precipitation ...