Low-speed wind tunnel experiments were conducted to examine the effects of jet exit behavior on the near-field characteristics of jets in crossflow. To better understand this problem, a row of six square jets were ...

The technique of Sheet Stamping by Deformable Forming Tools (SSDFT) has been recognized as a promising alternative to control the springback of sheet blanks. This paper deals with the springback of elastic-plastic circular ...

Large eddy simulation of flow over a wall-mounted cube in a channel was performed at a Reynolds number of 40000. The structure function modeling of the subgrid-scale stress terms was used with three slightly varying versions ...

The problem considered in this paper is that of compressible viscous flow over an open rectangular cavity, including the effects of shear layer thickness and triple deck structure on interaction with the trailing edge. ...

In this paper, physical modeling tests are conducted to study some aspects of the dynamic compaction method. The loose models are prepared with dry sand. Four cylindrical tampers with different weight and cross section ...

Coordinate Measuring Machines (CMMs) are designed for precision inspection of complex industrial products. Even though CMMs have high accuracy in electrical systems, mechanical structures prevent very high accuracy in these ...

Air-water two-phase flow usually occurs during a sudden rise in water level at a tunnel or during the falling of the water level at an upstream reservoir while entering the conduit. When this happens, different flow patterns ...

In this paper, the static buckling of especially orthotropic stringer-stiffened composite cylindrical shells subjected to combined axial compression and external pressure is investigated, based on geometrical non-linear ...

Recently, advanced methods have been developed for selection of suitable sites for different types of dam. Apart from location, selection of the proper type of dam for a given site is of the greatest importance for engineers. ...