Volume 11, Issue 4
مرور بر اساس
ارسال های اخیر
-
Enhancing Yarn Coverage with Electrospun Polyacrylonitrile Nanofibers via the Pin Spinning Method: An Investigation of Influencing Parameters
(ITAST (Iranian Textile Association of Science and Technology), 2023-10-01)در این تحقیق به هدف افزایش نظم و انسجام و همچنین افزایش مقاومت مکانیکی نخ نایلون پوشش داده شده با نانوالیاف پلی اکریلونیتریل به روش نوین الکتروریسی پین تولید شد. همچنین در طی این پژوهش به شناسایی و بررسی پارامترهای موثر ...
-
The effect of loom parameters on some properties of woven fabrics
(ITAST (Iranian Textile Association of Science and Technology), 2023-10-01)AbstractIn the present research, by changing the weft position, weave design, weft density, shed angle and loom speed, woven fabric was produced, and then the effect of these factors was investigated by performing thickness, ...
-
Improvement of tensile strength of glass/epoxy multilayer composites by addition of short glass fibers
(ITAST (Iranian Textile Association of Science and Technology), 2023-10-01)In order to achieve high mechanical performance for glass fiber/epoxy composites, it is necessary to improve the load transfer and surface bonding capabilities at the fiber/matrix interface. In this study, the effect of ...
-
Biological Applications of Double Nanofibers based on Silk Fibroin
(ITAST (Iranian Textile Association of Science and Technology), 2023-10-01)در این پژوهش، نانوالیاف بر پایه فیبروئین ابریشم (SF) و پلی‌وینیل الکل (PVA)، به‌عنوان پلیمرهای غیرسمی و زیست‌تخریب‌پذیر با استفاده از روش الکتروریسی با موفقیت تهیه شد. به‌منظور افزایش خاصیت ضد باکتریایی، بره‌موم (B) و نانو ...
-
Investigating the effect of various extraction solvents on the colorimetric and fastness properties of silk fabrics dyed with spent coffee grounds as the natural colorant
(ITAST (Iranian Textile Association of Science and Technology), 2023-10-01)Todays, natural colorants have attracted those working in the dyeing industry due to their biodegradability and less damage to the environment. Meanwhile, one of the very important issues in the use of natural colorants ...
-
3D printing of thermoset composite reinforced with continuous fibers and evaluation of its mechanical properties
(ITAST (Iranian Textile Association of Science and Technology), 2023-10-01)There has been a continuous interest in advancing fabrication methods associated with fiber-reinforced composites due to their growing importance across a variety of applications. 3D printing has emerged as a novel approach ...
