Volume 2, Issue 1
مرور بر اساس
ارسال های اخیر
-
Monolithic Three-way Palladium Catalytic Converters for Automobile Exhaust Emission Control
(Iranian Association of Chemical Engineers(IAChE), 2005-01-01)This article presents the research results on production and performance of palladium-only catalytic converters. Monolith is used as the catalyst carrier and gamma alumina as the substrate. Dipping method is used for ...
-
Dynamic Modeling of Granular Sludge in UASB Reactors
(Iranian Association of Chemical Engineers(IAChE), 2005-01-01)n this paper, a mathematical model has been derived to predict the granulation time of anaerobic sludge in UASB reactors. In the proposed model, some physical, chemical and biological parameters affecting the granulation ...
-
Prediction of Vapor-Liquid Equilibria Using CEOS /GE Models
(Iranian Association of Chemical Engineers(IAChE), 2005-01-01)The present study investigates the use of different GE mixing rules in cubic equations of state for prediction of phase behavior of multicomponent hydrocarbon systems. To predict VLE data in multicomponent symmetric and ...
-
The Effects of Operational Parameters on the Efficiency of a Mixer-Settler Extractor
(Iranian Association of Chemical Engineers(IAChE), 2005-01-01)The effects and influences of various operational parameters on the efficiency of mixer-settlers are thoroughly studied in this paper. One of the most important factors in designing a mixer-settler is to obtain an optimum ...
-
Experimental Comparison of Two Modifications of Activated Sludge for Treatment of Furfural-Containing Wastewater
(Iranian Association of Chemical Engineers(IAChE), 2005-01-01)A case study is presented in which two modifications of activated sludge treatment of complex chemical wastewater are experimentally compared: a combination of common activated sludge with powdered activated carbon treatment ...
-
Investigation of CO2 and H2O Addition to Natural Gas for Production of Synthesis Gas
(Iranian Association of Chemical Engineers(IAChE), 2005-01-01)General modeling and optimization of syngas production via noncatalytic autothermal partial oxidation of methane are carried out using our developed scientific software which was based on the minimization of total Gibbs ...
-
A New Model for Prediction of Heat Eddy Diffusivity in Pipe Expansion Turbulent Flows
(Iranian Association of Chemical Engineers(IAChE), 2005-01-01)A new model to calculate heat eddy diffusivity in separating and reattaching flows based on modification of constant Prt is proposed. This modification is made using an empirical correlation between maximum Nusselt number ...



