• Probabilistic Infrastructure Failure Cost Analysis Integrating with Equity Cost Using the Reliability Analysis 

  Norouzi, Yasaman؛ Ghasemi, Seyed Hooman؛ Jalayer, Mohammad (Pouyan Press, 2025-04-01)

  Quantifying infrastructure failure costs is pivotal for fostering target reliability and advancing equitable outcomes. Direct and indirect failure cost analyses must account for equity parameters such as fatalities, ...

  ---

• Tilt-Up System Optimization for Lattice Towers 

  Kowsari, Nima؛ Hassanpour Golriz, Mahmood؛ Rezaie, Zaher؛ Jafari, Mohammad؛ Ghalehnovi, Mansour (Pouyan Press, 2025-04-01)

  This paper investigates and optimizes the tilt-up system, commonly employed for the maintenance of telecommunication and wind turbine towers. Recognizing the inherent safety challenges and high costs associated with ...

  ---

• Performance Evaluation of Earthquake Acceleration Attenuation Models (1994–2023): A Case Study of the December 5, 2024 Khuzestan Earthquake 

  Rezaeemanesh, Mansoureh؛ Alibazi, Ali (Pouyan Press, 2025-01-01)

  Understanding the accuracy of acceleration attenuation relationships is crucial for improving seismic hazard analysis and ensuring the safety of structures in earthquake-prone regions. However, existing models may not fully ...

  ---

• Mixture - Related Factors Influencing Setting for Ambient Curing of Fly Ash – Based Geopolymer Binders 

  Magugu, Kwandiwe؛ Ekolu, Stephen؛ Naghizadeh, Abdolhossein؛ Quainoo, Henrry (Pouyan Press, 2025-01-01)

  Ambient–cured plain geopolymer binders typically exhibit unacceptably prolonged setting time values and weak development of mechanical properties. In this paper, a focussed literature review was done on setting time effects ...

  ---

• Geometric Optimization of Indeterminate Truss Structures under Non-Loading Effects 

  Ismail, Rana؛ Al-Tarafany, Dhiaa؛ Risan, Hussam (Pouyan Press, 2025-01-01)

  Despite the non-loading effects leading to a significant change in the internal forces of structural members and may result in structural collapse; however, if the error of construction is under control, the results will ...

  ---

• A Comparative Life Cycle Assessment (LCA) of Monopole Antenna and Microwave Oven for Water Heating 

  Al-Doori, Shatha؛ Abbassi, Bassim؛ Ramahi, Omar (Pouyan Press, 2025-01-01)

  Conducting a life cycle assessment (LCA) for technologies used for water heating is crucial for understanding their environmental impacts throughout their entire life cycles. This analysis facilitates the evaluation of ...

  ---

• Automated System Using HMM for Lung Disease Recognition Based on Cough Sounds 

  Pan, Shing-Tai؛ Lee, Bo-Kai؛ Wu, You-Qian (Pouyan Press, 2025-01-01)

  The main purpose of this paper is to recognize multiple lung diseases simultaneously when a cough sound is detected. In addition to detecting whether the person producing the cough sound has a lung disease, it can also ...

  ---

• Experimental Investigation and Simultaneous Optimisation of Honing Parameters of Dry Cast Iron Cylinder Relining Sleeves of Motor Vehicle Engine Blocks for Surface Finish and Energy Use 

  Tayisepi, Nicholas؛ Mugwagwa, Lameck؛ Mnkandla, Albert؛ Mapindu, Innocent؛ Muhla, Takudzwa (Pouyan Press, 2024-10-01)

  Machining based manufacturing industries consume significant amounts of electrical energy, to power the several modules constituting the machine tool, with low levels of efficiency. Honing operations, are vital machining ...

  ---

• Seismic Hazard Evaluation and Accelerated Curves for Kunduz City (Afghanistan) 

  Bakhshi, Hossein؛ Rahimi, Mohammad؛ Rastin, Mohammad؛ Rezaie, Zaher (Pouyan Press, 2025-01-01)

  This research presents a detailed seismic hazard evaluation for Kunduz City, Afghanistan, utilizing both deterministic and probabilistic methods to assess seismic risks. The study employs SeisRisk III software to analyze ...

  ---

• Compressive and Tensile Strength Increment of Concrete Using Recycled Aggregates and Rice Husk Ash 

  Mia, Md.؛ Hosen, Kamal؛ Chakma, Kripendra (Pouyan Press, 2024-10-01)

  This study investigates the use of recycled concrete aggregates (RCA) from deconstructed bridges and rice husk ash (RHA) from brick kiln residue in concrete production. By substituting 20% of cement with RHA, the research ...

  ---

• Determining Vibration Frequency and Damping of Metal Beams Using Image Processing Method 

  Moradi, Fardin؛ Sabouri, Jamshid؛ Sayyedfattahi, Sayyedjavad (Pouyan Press, 2024-10-01)

  In the present study, damping and frequency of two beams, including galvanized and steel beams, were evaluated using the image processing method. The beam supports were designed as a hinge and the intended beam was vibrated ...

  ---

• Knowledge Extraction from Trained ANN River Water Quality Parameters 

  Sahu, Pali؛ Londhe, Shreenivas؛ Kulkarni, Preeti (Pouyan Press, 2024-10-01)

  Environmental factors, agricultural production and human health are impacted by the evaluation of water quality indicators: chemical oxygen demand (COD), Dissolved Oxygen (DO) and biological oxygen demand (BOD). Artificial ...

  ---

• Investigating the Influence of Cement and Additive Normalization on Concrete Compressive Strength: A Statistical Analysis 

  Parmo, Parmo؛ Wardhana, Indrawata (Pouyan Press, 2024-10-01)

  Predicting the compressive strength of concrete presents a significant challenge due to its complex composition. Traditional approaches often grapple with data uncertainty, hindering accurate predictions. This study ...

  ---

• Ground Penetrating Radar for Monitoring Damage in Reinforced Concrete Bridges: A Reliable Tool for Structural Health Assessment 

  Falowo, Olumuyiwa؛ Oluwasegunfunmi, Victor؛ Babatunde, Ajiboye؛ Kunle, Olabisi (Pouyan Press, 2024-07-01)

  Ground penetrating radar has been developed and is increasingly used in bridge system and roadway condition assessment. Thus, this study evaluates the effectiveness of GPR for assessing concrete bridge deck condition, and ...

  ---

• Investigating the Effect of Climatic Parameters Predicting the Mortality Rate Due to Cardiovascular and Respiratory Disease with Soft Computing Methods 

  Ghazvinian, Hamidreza؛ Karami, Hojat (Pouyan Press, 2024-10-01)

  It can be very important to accurately identify and predict with smart models in disease outbreaks and as a result in mortality statistics. This study was conducted with the aim of comparing the performance of multilayer ...

  ---

• Optimal Design of Welded Structure Using SVM 

  Jueyendah, Sebghatullah؛ Martins, Carlos Humberto (Pouyan Press, 2024-07-01)

  Engineers and researchers can develop more efficient, load-resistant, reliable, and cost-effective structures using optimization techniques, Sensitivity Analysis (SA), and support vector machine (SVM) applications. This ...

  ---

• Modelling of Gust Factor Based Dynamic Loading of Buildings Using Python Programming 

  Dumka, Pankaj؛ Chauhan, Rishika؛ Srivastava, Amit (Pouyan Press, 2024-07-01)

  In this research article, Python programming has been used to model the dynamic wind loading on the structures by using the Gust factor approach. The evaluation has included the design wind velocity and pressure, the Gust ...

  ---

• Analysis and Design of High-Rise Reinforced Concrete Structures under Torsional Action 

  Ahmed, Bulbul؛ Palash, A.B.M. Golam Rabbany (Pouyan Press, 2024-07-01)

  The number of high-rise buildings is increasing rapidly to meet up the demand of people. These high-rise buildings experience lateral forces and structural elements are affected due to this lateral forces. Torsional force ...

  ---

• Unveiling the Artificial Neural Network mystery with Special reference to Applications in Civil Engineering 

  Kulkarni, Preeti؛ Londhe, Shreenivas؛ Dixit, Pradnya؛ Joshi, Shardul؛ Shah, Shalaka؛ Sahu, Pali Sahu (Pouyan Press, 2024-07-01)

  Over the past few decades, Artificial Neural Networks (ANN) have carved a niche within the Civil Engineering applications and has been a supplementary to the traditional mathematical models. However, ANN being a ‘Black ...

  ---

• Optimal Shear Wall Placement for Seismic Performance: A Comparative Study of Building Codes 

  Hosen, Kamal (Pouyan Press, 2024-07-01)

  Shear walls are one of the most popular lateral load-resisting methods used in high-rise structures. Major design factors against structural collapse in RC buildings include lateral stresses (wind, seismic). Notably, in ...

  ---

View more