Chromium selenide (Cr2Se3) nanoparticles were prepared by hydrothermal method from Cr(NO3)3.9H2O and SeCl4 as precursors. These nanoparticles could be produced simply in the presence of cetyltrimethyl ammonium bromide, ...

Nanostructured Al and Al-Mg (Mg 30 wt. %) powders with the mean crystallite sizes of 42 and 11 nm were prepared through the solid state ball milling technique. The milling process was performed for various times up to 12 ...

The high crystallinity ZnO nanoparticles with an average particle diameter 30 nm have been successfully synthesized with a surfactant-mediated method. The cationic surfactant (cetyltrimethylammonium bromide, CTAB) and the ...

In this research work, silica nano-porous thin films were deposited on glass substrates by layer by layer method. The thin films were calcinated at various calcination temperatures (200, 300, 400, and 500 °C). The morphology, ...

TiO2 nanopowder is prepared by simple sol-gel method using starting material as titanium isopropoxide with methanol and annealed at 600°C, 700°C and 800°C for 1 hour in air. X-ray diffraction pattern revealed the presence ...

La2O2SO4 nanoceramic was synthesized via sol-gel method using lanthanum nitrate and thioacetamid as precursors and stearic acid as polymeric precursor. The characterization studies were conducted by X-ray diffraction, ...

Among the several available techniques to produce the braided composite rods for construction industry, nidltrusion process is becoming the most widespread and cost-effective continuous processing technique. The work ...