Volume 2, Issue 2
مرور بر اساس
ارسال های اخیر
- 
Influence of Hardening on the Cyclic Plastic Zone Around Crack Tip in Pure Copper CT Specimens (Bu-Ali Sina University, 2018-03-01)Under cyclic loading, the plastic zone becomes complicated during unloading. The energy-absorbing cyclic plastic zone is a stimulant for crack growth and can be a criterion for determining the damage around the fatigue ...
 
- 
The Analysis of Light-duty Truck Diesel Engine Crankshaft Failure (Bu-Ali Sina University, 2018-03-01)In this study, crankshaft failure of four-cylinder light-duty truck diesel engine was examined. The failure occurred by fatigue crack growth which was initiated from a surface defect after about 95000 km on the second ...
 
- 
Ductile Fracture Analysis of High-strength Steel Bars Using Micromechanical GTN Model (Bu-Ali Sina University, 2018-03-01)Recent studies on the mechanics of materials have shown that the ductile fracture is significantly affected by the stress invariants among progressive plastic deformation. In this paper the micro-mechanical Gurson-Tverga ...
 
- 
Nonlinear Stress Analysis of SMA Beam Based on the Three-dimensional Boyd-Lagoudas Model Considering Large Deformations (Bu-Ali Sina University, 2018-03-01)In this study, a nonlinear superelastic bending of shape memory alloy (SMA) beam with consideration of the material and geometric nonlinearity effects which are coupled with each other, has been investigated. By using ...
 
- 
Heat Production in a Simply Supported Multilayer Elliptic Annulus Composite Plate and Its Associated Thermal Stresses (Bu-Ali Sina University, 2018-03-01)This paper is concerned with the theoretical treatment of thermoelastic problem in multilayer elliptical composite plate and the generation of heat in the body as well as at the interfaces with imperfect thermal contact ...
 



