Volume 20, Issue 3
مرور بر اساس
ارسال های اخیر
-
Effect of Particle Size of Zinc Powder on the Efficiency of Ni-Cd Cementation in Cold Purification Reactor
(Iranian Association of Chemical Engineers(IAChE), 2023-11-01)The Ni-Cd cementation reaction occurs on the surface of zinc powder, and the Ni-Cd ions in the zinc sulfate solution (make-up) change into a solid metal deposit during the process. The primary purpose of this study is to ...
-
Screening and Optimization of Gas Sweetening Process Parameters with MDEA-PZ Solvent using Plackett-Burman Approach
(Iranian Association of Chemical Engineers(IAChE), 2023-11-01)Amine gas sweetening is a process in which acidic gases including hydrogen sulfide (H2S) and carbon dioxide (CO2) are removed by a solution of water and amines. Many parameters influence the sweetening process. Knowledge ...
-
Optimization of cultivation conditions of Candida catenulata in synthesizing acidic sophorolipid
(Iranian Association of Chemical Engineers(IAChE), 2023-11-01)Application of agro-industrial waste as the feedstock helps to decrease the operational cost of the fermentation process. Soapstock is a by-product of vegetable oil refinery enriched fatty acids including linoleic acid has ...
-
The Effect of Carbon Source Flow Rate on Growth Quality of Super-Aligned Carbon Nanotube Arrays by Chemical Vapor Deposition Method
(Iranian Association of Chemical Engineers(IAChE), 2023-11-01)In this study, carbon nanotubes (CNTs) were fully aligned by chemical vapor deposition (CVD) at atmospheric pressure on a silicon substrate at two carbon source flow rates of 28 and 38 sccm (standard cubic centimeter per ...
-
Dissolution improvement and toxic impurities removal of the sulfide ores leaching by polyoxometalate oxidizer: experimental design and industrial simulation
(Iranian Association of Chemical Engineers(IAChE), 2023-11-01)Nowadays, sulfide ores due to the very low solubility in acids and also the production of toxic and harmful by-products are rarely used to extract metals. In this method, Polyoxometalate (POM) was used as a strong oxidizer ...



