• Evaluation of Microbial and Sensory Properties of Jug Cheese Packed in the Biodegradable Film of Polyvinyl Alcohol and Pinto Bean Starch-Containing Garlic, Ginger, and Cinnamon Essential Oils 

  Khazaei, Ali؛ Nateghi, Leila؛ Zand, Nazanin (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  IBiodegradability and antimicrobial activity of food packaging materials are the most important parameters of modern food packaging industries. Therefore, the present study aimed to use a biodegradable film of polyvinyl ...

  ---

• Pyrolysis of Coal for Fuel Production: A Review of the Effect of Various Parameters on the Pyrolysis Behavior of Coal 

  Masood, Hafiz؛ Ali, Najaf؛ Iqbal, Tanveer؛ Ashraf, Muhammad (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  Alternative energy and renewable sources received considerable attention  from many researchers because fossil fuel has intermediate products during the conversion of coal. Intermediate products such as synthesis gas, ...

  ---

• Improvement of Solar Cell Performance by Annealing Temperature Treatment and Active Layer Ratio 

  Hardeli, Hardeli؛ Sanjaya, Hary؛ Permatasari, Putri؛ Karnila, Resi (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  Polymer solar cells are potential candidates for providing energy as an alternative energy source. In this type of solar cell, the active layer of the semiconductor material absorbs light. The P3HT: PPV layer was used as ...

  ---

• Evaluation of the Combustion and Emission Parameters of Waste Transformer Oil and Its Diesel Blends 

  Đorđić, Dragiša؛ Đurić, Slavko؛ Milotić, Milan؛ Bojić, Žarko (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  The production of fuel from Waste Transformer Oil (WTO) is an excellent way to produce alternative fuels. The aim of research in this paper is to obtain fuel by mixing WTO with diesel fuel in different mass ratios that can ...

  ---

• Pore Space Characterization of Carbonated Binary Micro-Computed Tomography Images, Case Study 

  Ashrafi, Mohammad؛ Tabatabaei-Nezhad, Seyyed Alireza؛ Khodapanh, Elnaz (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  Pore space characterization helps a better understanding of porous media. The pore geometry and topological properties in carbonated rocks are important for a better understanding of the complex hydrologic and elastic ...

  ---

• Finite-time Sliding Mode Control for Continuous Stirred Tank Reactor Based on Disturbance Observer 

  Derakhshannia, Mehran؛ Moosapour, Seyyed Sajjad (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  This paper aims to investigate the robust control problem of Continuously Stirred Tank Reactors (CSTR). A CSTR is one of the most essential pieces of equipment in chemical processes, whose effects of highly nonlinear dynamic ...

  ---

• Effect of Flow Field (Stirring) on the Heat-Induced Fibrillogenesis of Β-Lactoglobulin in the Presence of Glucose at Neutral pH 

  Sharma, Rajesh؛ Furusawa, Kazuya؛ Fukui, Akimasa؛ Sasaki, Naoki (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  The effect of stirring on the amyloid fibrillogenesis of β-Lactoglobulin (βLG) at pH 7 was studied in the presence of glucose (Glu). Fibrillogenesis was carried out by heating the 0.30 mM βLG solution at pH 7 with and ...

  ---

• Rheological Studies on Interactions between CTAB and PEG in Aqueous Solution Using RSM 

  Khan, M Talib Sameer؛ Kamil, Mohammad (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  In this work, the study of the rheological behavior of the aqueous solution of cationic surfactant, cetyltrimethylammonium bromide (CTAB) and nonionic polymer, polyethylene glycol (PEG 3000) has been carried out. Response ...

  ---

• The Effects of Main Formulation and Process Parameters on Characteristics of Frankincense Essential Oil Microemulsions 

  MemarMaher, Behnaz؛ Molai, Soheila؛ Anarjan, Navideh؛ Hamishehkar, Hamed (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  The frankincense essential oil was successfully incorporated into nano-sized microemulsions systems through low energy self-emulsification technique. The effects of main formulation parameters, namely, surfactant, ...

  ---

• An increase in the Copper Recovery of the Sarcheshmeh Copper Complex through Reagent Modifications 

  Salajegheh, Ehsan؛ Parsapour, Gholamabbas؛ Akbari, Abbas (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  In the flotation of sulfide minerals, particularly in the separation between pyrite and chalcopyrite, adjustment of the pH and reagents dosages is very important.  Process auditing at the Sarcheshmeh copper complex showed ...

  ---

• AHP-Based Amine Selection in Sour Gas Treating Process: Simulation and Optimization 

  Karimi, Asadollah؛ Sadeghi, Arash (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  The acid gases (H2S and CO2) are unpleasant groups in the natural gas (sour gas) stream, which must be reduced. The presence of acid gases will have operational problems such as corrosion in the processing facilities and, ...

  ---

• Assessment of Sodium Silicofluoride as a Fluoride Source in Drinking Water Systems 

  Rohani, Rosiah؛ Basiron, Siti Aishah؛ Khairul Zaman, Nadiah؛ Md Yusoff, Izzati Izni؛ Sheikh Abdullah, Siti Rozaimah؛ Abdul Rashid, Aina Izzati؛ Muhamad, Nur Shazwani؛ Mohd Kasim, Noor Alicezah (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  Fluoridation is a process of adding fluoride to the treated water source as the fluoride present in the drinking water is beneficial in preventing dental and bone caries, especially for children.  The range for fluoride ...

  ---

• Removal of Textile Dyes on a Biosorbent Based on the Leaves of Atriplex Halimus 

  Douara, Nadia؛ Benzekri Benallou, Moukhtar؛ Termoul, Mourad؛ Mekibes, Zohra؛ Bestani, Benaouda؛ Benderdouche, Nouredine (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  The objective of this study is to characterize the Biosorbent (Atriplex Halimus leaves) and its application in the removal by adsorption of anionic and cationic dyes known for their toxicity such as Bemacid Blue (BB), ...

  ---

• An Alternative Pre-Treatment Sterilization Solution Synthesis Utilizing Boric Acid Doped Graphene Oxide 

  Esencan Türkaslan, Banu؛ Dalbeyler, Ayça (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  In medicine and dentistry, the sterilization process is mandatory for the benefit of both patients and healthcare personnel. Tools used in treatment interventions should lack microorganisms and must be sterilized after ...

  ---

• Vitamin B2 Removal from Aqueous Solution Using Magnetic Nanoparticles/ Orange Peel Composite: Optimization Using Response Surface Methodology 

  SmiLey, Erfan؛ Tadayon, Fariba؛ Sohrabi, Mahmoud Reza (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  In this study, the removal of vitamin B2 from the aqueous solution using a synthesized multi-component nano-magnetic adsorbent modified by orange peel was studied. The structure and the morphology of the prepared nanocomposite ...

  ---

• Antimony (III) Removal from Electrolyte of Sarcheshmeh Copper Complex Refinery Using CEC370 and Purolite S957 Resins 

  Shahhoseini, Mehri؛ Saeidi, Mahboubeh (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  The major goal of electric copper refinement is to manufacture high-purity cathode copper and minimize development expenditures. Elements (Bi, As, and Sb) have an adverse impact on the consistency of the ultimate cathode. ...

  ---

• Synthesis and Application of Polyacrylamide/Cellulose Gel/Fuller’s Earth Composite for Removal of Methylene Blue from Water 

  Sharma, Amrita؛ Pande, Poorn؛ Khare, Prateek؛ Kumar, Kuldeep (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  In this study, eco-friendly composite material polyacrylamide/cellulose hydrogel reinforced with fuller's earth (PAAm/CG/FE), has been synthesized and used for the effective adsorption of the Methylene Blue (MB) dye. The ...

  ---

• Fe3O4/Polystyrene-Alginate Nanocomposite as a Novel Adsorbent for Highly Efficient Removal of Dyes 

  Mohammadi, Robab؛ Masoumi, Bakhshali؛ Mashayekhi, Ramin؛ Hosseinian, Akram (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  In this study, Fe3O4/polystyrene-alginate nanocomposite with high adsorption capacity was successfully prepared. Characterization of Fe3O4/polystyrene-alginate nanocomposite was carried out by various instruments, including ...

  ---

• Effect of Clay Modifier on the Structure and Transport Properties in Polyurethane/Clay Nanocomposites as Barrier Materials 

  Ramesh, S؛ Kamalarajan, P.؛ Punithamoorthy, K. (Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECR, 2022-11-01)

  In this study, nanocomposites of Thermoplastic Polyurethane (TPU) clay are synthesized and used as a gas barrier property. The NCO-terminated TPU prepolymer was prepared by solution polymerization method using a 1:2 ratio ...

  ---

View more