• Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading 

  Micaelo, Rui؛ Verdete, Marta؛ Almeida, Raquel؛ Gao, Wan-Yang؛ Biscaia, Hugo (Shahid Chamran University of Ahvaz, 2022-01-01)

  This study aims to mitigate the gap of knowledge on the cyclic bond behaviour of Carbon Fiber Reinforced Polymer (CFRP) bonded onto a steel substrate. The Distinct Element Method was used to model different bonding techniques ...

  ---

• Effects of Periodic Loading on Longitudinal Fracture in ‎Viscoelastic Functionally Graded Beam Structures‎ 

  Rizov, Victor (Shahid Chamran University of Ahvaz, 2022-01-01)

  This paper analyzes the effects of periodic external loading on the longitudinal fracture of a beam structure made of linear viscoelastic material. A longitudinal crack splits the cracked part of the beam into left-hand ...

  ---

• Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation 

  Simon Portillo, Francisco J.؛ Cuadrado Sempere, Óscar؛ Marques, Eduardo A.S.؛ Sánchez Lozano, Miguel؛ da Silva, Lucas F.M. (Shahid Chamran University of Ahvaz, 2022-01-01)

  This work focuses on the mechanical characterisation of adhesives with hyperelastic behaviour, and on the determination of the behavioural laws that best represent them, in order to be able to introduce them into simulation ...

  ---

• Geometric Optimization of Jet Pump Used in Vacuum ‎Distillation Applications under Different Operating Conditions ‎using Genetic-algorithm Methods 

  Orozco Murillo, William؛ Patiño Arcila, Iván D.؛ Palacio-Fernández, José A. (Shahid Chamran University of Ahvaz, 2022-01-01)

  Genetic-algorithm methods are used here for single-objective (SO) and multi-objective (MO) geometrical optimizations of jet pumps used in vacuum distillation of ethanol, an application not deeply studied in scientific ...

  ---

• Proportional Topology Optimization under ‎Reliability-based Constraints 

  Amaral, Rodrigo؛ Borges, Julian؛ Gomes, Herbert (Shahid Chamran University of Ahvaz, 2022-01-01)

  Topology optimization is a methodology widely used in the design phase that has gained space in engineering. On the other hand, uncertainty is present in material properties, loads, and boundary conditions in practically ...

  ---

• Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers 

  Ferroudj, Nawal؛ KÖTEN, Hasan؛ Boudebous, Saadoun (Shahid Chamran University of Ahvaz, 2022-01-01)

  In the present study, fluid flow, heat transfer, and entropy generation for mixed convection inside a water-filled square cavity were investigated numerically. The sidewalls of the cavity, which move upwards, are kept at ...

  ---

• Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎ 

  Akinshilo, Akinbowale T.؛ Davodi, Amin؛ Ilegbusi, Adeleke؛ Sobamowo, Gbeminiyi (Shahid Chamran University of Ahvaz, 2022-01-01)

  Heat transfer of fluids plays an important role in process flows, as this has significant impacts in process configurations, energy pricing and utilization. Therefore, this paper, the heat and mass transfer of a radiating ...

  ---

• Nonstandard Dynamically Consistent Numerical Methods for ‎MSEIR Model 

  Shokri, Ali؛ Mehdizadeh Khalsaraei, Mohammad؛ Molayi, Maryam (Shahid Chamran University of Ahvaz, 2022-01-01)

  In this paper, two numerical methods for solving the MSEIR model are presented. In constructing these methods, the non-standard finite difference strategy is used. The new methods preserve the qualitative properties of the ...

  ---

• Dynamic Response of Functionally Graded Carbon ‎Nanotube-Reinforced Hybrid Composite Plates 

  Chen, Chun-Sheng؛ Fung, Chin-Ping؛ Wang, Hai؛ Chen, Wei-Ren (Shahid Chamran University of Ahvaz, 2022-01-01)

  Dynamic instability behavior of functionally graded carbon nanotube reinforced hybrid composite plates subjected to periodic loadings is studied. The governing equations of motion of Mathieu-type are established by using ...

  ---

• On the Analytical and Computational Methodologies for Modelling Two-wheeled Vehicles within the Multibody Dynamics Framework: A Systematic Literature Review 

  Manrique-Escobar, Camilo Andrés؛ Pappalardo, Carmine Maria؛ Guida, Domenico (Shahid Chamran University of Ahvaz, 2022-01-01)

  In this paper, a literature review on two-wheeled vehicle systems is methodically performed and presented. For this purpose, the principal aspects concerning the kinematic, dynamic, control, and identification features of ...

  ---

• Numerical Scheme based on Non-polynomial Spline Functions for ‎the System of Second Order Boundary Value Problems arising in ‎Various Engineering Applications 

  Chaurasia, Anju؛ Gupta, Yogesh؛ Srivastava, Prakash C. (Shahid Chamran University of Ahvaz, 2022-01-01)

  Several applications of computational science and engineering, including population dynamics, optimal control, and physics, reduce to the study of a system of second-order boundary value problems. To achieve the improved ...

  ---

• Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate 

  Malekzadeh Fard, Keramat؛ Khajehdehi Kavanroodi, Mehdi؛ Malek-Mohammadi, Hosein؛ Pourmoayed, Ali (Shahid Chamran University of Ahvaz, 2022-01-01)

  In this article, the vibration and buckling of a double-layer Graphene sheet (DLGS) coupled with a piezoelectric nanoplate through an elastic medium (Pasternak and Winkler models) are investigated. DLGS are subjected to ...

  ---

• Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel 

  Izadpanah, Ehsan؛ Yazdanian, Milan؛ Hekmat, Mohamad Hamed؛ Amini, Yasser (Shahid Chamran University of Ahvaz, 2022-01-01)

  In this study, the effect of stationary and oscillating blades on the forced convection heat transfer in a channel is studied numerically. Simulations are performed in a fully-developed, laminar, unsteady, and incompressible ...

  ---

• Distributed-parameter Dynamic Modeling and Bifurcation Analysis of a Trapezoidal Piezomagnetoelastic Energy Harvester 

  Mohammad Khanlo, Heshmatallah؛ Dehghani, Reza (Shahid Chamran University of Ahvaz, 2022-01-01)

  In this paper, the effect of the bimorph profile on the nonlinear dynamic behavior and performance of a vibratory piezomagnetoelastic energy harvester is investigated. The proposed model is composed of upper and lower ...

  ---

• Numerical Solution of the Time Fractional Reaction-advection-diffusion Equation in Porous Media 

  Pandey, Prashant؛ Kumar, Sachin؛ Gómez-Aguilar, J.F. (Shahid Chamran University of Ahvaz, 2022-01-01)

  In this work, we obtained the numerical solution for the system of nonlinear time-fractional order advection-reaction-diffusion equation using the homotopy perturbation method using Laplace transform method with fractional ...

  ---

• Nonlinear Convective Flow of Maxwell Fluid over a Slendering Stretching Sheet with Heat Source/Sink 

  Gayatri, Mocherla؛ Jayaramireddy, Konda؛ Jayachandra Babu, Macherla (Shahid Chamran University of Ahvaz, 2022-01-01)

  In this study, the features of Maxwell fluid flow through a stretching sheet (variable thickness) with heat source/sink and melting heat transfer are analyzed. Leading equations of the course are transmuted with suitable ...

  ---

• A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process 

  Tagimalek, Hadi؛ Maraki, Mohammad Reza؛ Mahmoodi, Masoud؛ Azargoman, Majid (Shahid Chamran University of Ahvaz, 2022-01-01)

  The friction stir welding method is one of the solid-state welding methods for non-homogeneous metals. In this study, the 5XXX series aluminum sample and pure copper are subjected to four passes friction welding process ...

  ---

• Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions 

  Indumathi, N.؛ Ganga, B.؛ Jayaprakash, R.؛ Abdul Hakeem, A.K. (Shahid Chamran University of Ahvaz, 2022-01-01)

  Nowadays, the preparation, characterization, and modeling of nanofluids are deliberated in plenty to improve the heat transfer effects. Therefore, this paper centers on the heat transfer effects of three separate hybrid ...

  ---

• Numerical Simulation of Unsteady Flow toward a Stretching/Shrinking Sheet in Porous Medium Filled with a Hybrid Nanofluid 

  Dinarvand, Saeed؛ Yousefi, Mohammad؛ Chamkha, Ali. J (Shahid Chamran University of Ahvaz, 2022-01-01)

  The purpose of this study is to present simulation and numerical solutions to the unsteady flow and heat transfer near stagnation point over a stretching/shrinking sheet in porous medium filled with a hybrid nanofluid. ...

  ---

• Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF) 

  Rakhshkhorshid, Masoud؛ Emam, Sayyed Mohammad؛ Lakhi, Mohammad؛ Ghahremani, Saeed (Shahid Chamran University of Ahvaz, 2022-01-01)

  Medium density fiberboard (MDF) is an engineering product that is used in many industrial and general applications such as the furniture industry and kitchen cabinets. Generally, MDF products are generated by screw joints ...

  ---

View more