Supercritical Fluid Extraction of β-Carotene from Crude Palm Oil Using CO2 in a Bubbler Extractor: Mass Transfer Study
(ندگان)پدیدآور
Davarnejad, RezaNiza, Norazlila MohammadArpanahzadeh, ShahrzadZakeri, Melikaنوع مدرک
TextResearch Article
زبان مدرک
Englishچکیده
In this study, the diffusivity and volumetric mass transfer coefficients for the extraction of β-carotene from crude palm oil using CO2 solvent in supercritical fluid were determined in the pressure range of 7.5-17.5 MPa and temperature range of 80-120 ºC. For this purpose, a statistical method was applied in order to minimize the number of experiments required. The volumetric mass transfer coefficient for the extraction of β-carotene was then correlated as a function of pressure, temperature and extraction time in order to study the effect of each of these variables on the coefficient. The experimental results showed that the maximum volumetric mass transfer coefficient was around 2.486 × 10-2 s-1 at pressure of 7.5 MPa, temperature of 100 ºC and extraction time of 1 hour. The minimum volumetric mass transfer coefficient was 0.046 × 10-2 s-1 at pressure of 17.5 MPa, temperature of 120 ºC and extraction time of 5 hours. The optimum volumetric mass transfer coefficient was statistically obtained around 6.700 × 10-3 s-1 at pressure of 17.7 MPa, temperature of 100.5 ºC and extraction time of 3.9 hours.
کلید واژگان
β-Carotenediffusion
Extraction
Mass transfer
Optimization
Supercritical fluid
Energy, Heat Transfer
Mass Transfer, Separation Processes
شماره نشریه
4تاریخ نشر
2014-12-011393-09-10
ناشر
Iranian Institute of Research and Development in Chemical Industries (IRDCI)-ACECRسازمان پدید آورنده
Department of Chemical Engineering, Faculty of Engineering, Arak University, P.O. Box 38156-8-8349 Arak, I.R. IRANSchool of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang, MALYSIA
Department of Chemical Engineering, Faculty of Engineering, Arak University, P.O. Box 38156-8-8349 Arak, I.R. IRAN
Department of Chemical Engineering, Faculty of Engineering, Arak University, P.O. Box 38156-8-8349 Arak, I.R. IRAN




