A vibrational base nondestructive method is proposed to estimate the modulus of rupture (MOR) in medium density fiberboard (MDF) whole plate. A premium grade MDF panel was tested in longitudinal and flexural vibration ...

In this paper, the failure analysis was performed on a crashed airplane trunk sample. Received sample was composed of five different layers; Al 2024 as outer layer, a nearly pure Al clad, an anodized layer, an isolating ...

In this study, the simultaneous effects of Zn addition and critical gate velocity on hot tearing susceptibility of A356 and A206 aluminum alloys were investigated. In order to investigate these two parameters, ingate ...

Soft soil is one of the major challenges in engineering projects. Improving soil's engineering properties is called soil stabilization. This paper focuses on soil stabilization materials and methods thereby soils and related ...

The aim of this study is comparing preparation methods of hydroxyapatite-bioglass composite nanopowders which can be prepared in different routes based on sol-gel method for orthopaedic/dental applications. Nanostructure ...

In current research, the Friction Stir Welding (FSW) technique was used to create a metallurgical joint between Al 6061 plates and Cu meat core. The plates were welded using single pass weld with the rotational speed of ...

In the thermal spray process,  particulate materials can be melted  by plasma atmosphere due to its high local temperature from 8700 ◦C to 15,000 ◦C. Therefore, the material powders turn into droplets ...