| dc.contributor.author | Khademizadeh, H. | en_US |
| dc.contributor.author | Eftekhari, S.A. | en_US |
| dc.contributor.author | Abtahi Froushani, S.H. | en_US |
| dc.date.accessioned | 1399-07-09T09:02:43Z | fa_IR |
| dc.date.accessioned | 2020-09-30T09:02:43Z | |
| dc.date.available | 1399-07-09T09:02:43Z | fa_IR |
| dc.date.available | 2020-09-30T09:02:43Z | |
| dc.date.issued | 2014-11-01 | en_US |
| dc.date.issued | 1393-08-10 | fa_IR |
| dc.date.submitted | 2015-11-07 | en_US |
| dc.date.submitted | 1394-08-16 | fa_IR |
| dc.identifier.citation | Khademizadeh, H., Eftekhari, S.A., Abtahi Froushani, S.H.. (2014). Parameter Analysis and optimization of equal channel angular pressing extrusion for titanium alloy using Taguchi design of experiments method. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 7(3), 45-56. | en_US |
| dc.identifier.issn | 2008-4927 | |
| dc.identifier.uri | http://jsme.iaukhsh.ac.ir/article_516007.html | |
| dc.identifier.uri | https://iranjournals.nlai.ir/handle/123456789/353643 | |
| dc.description.abstract | In this paper the influence of different parameters on equal channel angular pressing (EADAP) of titanium alloy is investigated. In the first step the most important parameters are selected, and then a table of experiments is designed using Taguchi method. After designing the table of experiments, all of the experiments are simulated using Abacus software and the results are optimized using Taguchi method. The results shows that the optimum levels for ECAP method between the implemented experiments of titanium are 120 degrees for die channel, ambient temperature and 2 passes. | en_US |
| dc.format.extent | 886 | |
| dc.format.mimetype | application/pdf | |
| dc.language | English | |
| dc.language.iso | en_US | |
| dc.publisher | Islamic Azad University, Khomeinishahr Branch | en_US |
| dc.relation.ispartof | Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering | en_US |
| dc.subject | Extrusion | en_US |
| dc.subject | Equal channel angular pressing (ECAP) | en_US |
| dc.subject | FEM | en_US |
| dc.subject | Optimization | en_US |
| dc.subject | Taguchi Method | en_US |
| dc.subject | ABAQUS | en_US |
| dc.title | Parameter Analysis and optimization of equal channel angular pressing extrusion for titanium alloy using Taguchi design of experiments method | en_US |
| dc.type | Text | en_US |
| dc.type | Persian | en_US |
| dc.contributor.department | Assistant Prof., Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Isfahan, Iran | en_US |
| dc.contributor.department | Assistant Prof., Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Isfahan, Iran | en_US |
| dc.contributor.department | MSc Student, Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Isfahan, Iran | en_US |
| dc.citation.volume | 7 | |
| dc.citation.issue | 3 | |
| dc.citation.spage | 45 | |
| dc.citation.epage | 56 | |
