• ثبت نام
    • ورود به سامانه
    مشاهده مورد 
    •   صفحهٔ اصلی
    • نشریات انگلیسی
    • International Journal of Engineering
    • Volume 28, Issue 8
    • مشاهده مورد
    •   صفحهٔ اصلی
    • نشریات انگلیسی
    • International Journal of Engineering
    • Volume 28, Issue 8
    • مشاهده مورد
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Studying the Effect of Reformer Gas and Exhaust Gas Recirculation on Homogeneous Charge Compression Ignition Engine Operation

    (ندگان)پدیدآور
    Pourfallah, Mohsen
    Thumbnail
    دریافت مدرک مشاهده
    FullText
    اندازه فایل: 
    1.266 مگابایت
    نوع فايل (MIME): 
    PDF
    نوع مدرک
    Text
    زبان مدرک
    English
    نمایش کامل رکورد
    چکیده
    Combustion in homogeneous charge compression ignition (HCCI) engine is controlled auto ignition of well-mixed fuel, air and residual gas. Since onset of HCCI combustion depends on the auto ignition of fuel/air mixture, there is no direct control on the start of combustion process. Therefore, HCCI combustion becomes unstable rather easily especially at lower and higher engine load. Charge stratification has the potential to extend the load limits of HCCI combustion by improving the control over the combustion phase as well as reducing the maximum of pressure rise. In this study, a combination of experiment and numerical simulation was carried out to investigate the effect of fuel stratification using reformer gas and EGR on HCCI natural gas combustion. It was found that fuel stratification in this case increased the autoignition property of natural gas. On the lean operation boundary, reformer gas and EGR blending enhanced the autoignition by advancing combustion timing at identical initial conditions compared to pure natural gas that expanded the lean boundary of the operating region.
    کلید واژگان
    HCCI Engine
    charge stratification
    Reformer gas
    Combustion Control

    شماره نشریه
    8
    تاریخ نشر
    2015-08-01
    1394-05-10
    ناشر
    Materials and Energy Research Center
    سازمان پدید آورنده
    Mechanical & Indusrial Engineering, Babol Noshirvani University of Technology

    شاپا
    1025-2495
    1735-9244
    URI
    http://www.ije.ir/article_72567.html
    https://iranjournals.nlai.ir/handle/123456789/337314

    مرور

    همه جای سامانهپایگاه‌ها و مجموعه‌ها بر اساس تاریخ انتشارپدیدآورانعناوینموضوع‌‌هااین مجموعه بر اساس تاریخ انتشارپدیدآورانعناوینموضوع‌‌ها

    حساب من

    ورود به سامانهثبت نام

    آمار

    مشاهده آمار استفاده

    تازه ترین ها

    تازه ترین مدارک
    © کليه حقوق اين سامانه برای سازمان اسناد و کتابخانه ملی ایران محفوظ است
    تماس با ما | ارسال بازخورد
    قدرت یافته توسطسیناوب