Volume 1, Issue 2
مرور بر اساس
ارسال های اخیر
-
Static Strain Aging Behavior of Low Carbon Steel Drawn Wire
(Shiraz University, 2014-10-01)The static strain aging is a phenomenon that can change the mechanical properties of low carbon steels. Thus, the static strain aging behavior of low carbon steel wires after drawing process is studied. To do so, the wires ...
-
Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test
(Shiraz University, 2014-10-01)In this work dynamic recrystallization behavior of AISI 403 martensitic stainless steel was studied using hot compression tests over temperature range of 900 C -1200 C and strain rate range of 0.001 s-1 - 1 s-1. The ...
-
The Effect of Fe Additive on Plastic Deformation for Crush-Boxes with Closed-Cell Metal Foams, Part II: Al-Composite Foam-Filled brass tubes Compression Response
(Shiraz University, 2014-10-01)The brass tubes with foam cores of AlSi7SiC3, AlSi7SiC3Fe1 and AlSi7SiC3Fe3 were produced as the crush-boxes with circle and square cross-section. Then axial compressive behavior and energy absorption capability of the ...
-
Static analysis of rectangular nanoplates using exponential shear deformation theory based on strain gradient elasticity theory
(Shiraz University, 2014-10-01)In this research, the bending analysis of rectangular nanoplates subjected to mechanical loading is investigated. For this purpose, the strain gradient elasticity theory with one gradient parameter is presented to study ...
-
The Relationship between Constant Friction Factor and Coefficient of Friction in Metal Forming using Finite Element Analysis
(Shiraz University, 2014-10-01)Frictional shear stress is usually determined by utilizing the coefficient of friction or the constant friction factor models. The present study deals with finite element analysis of double cup extrusion process to determine ...
