In this work, electrochemical methods such as Tafel polarization and electrochemical impedance spectroscopy (EIS) were used to study the inhibition efficiency of Nettle leaves hydroalcoholic extract as a green corrosion ...

The microstructure of dual phase steels can be considered as a matrix of ferrite phase reinforced by martensite particles. Recent measurements show that the mechanical properties of the ferrite phase are changed with the ...

The cold roll bonding of Al on AISI 304L stainless steel was carried out to fabricate the Al/304L/Al clad sheet composites. The maximum bond strength of 20 N/mm was acquired just by 38% reduction, for which the tearing of ...

Mold powders used in the continuous casting of steel contain the harmful CaF2 as a main substance developing toxic gases such as SiF4 and HF at elevated temperatures. In this study, three samples of ...

Many efforts have been made to model the the hot deformation (dynamic recrystallization) flow curves of different materials. Phenomenological constitutive models, physical-based constitutive models and artificial neural ...

The aim of this research was to study the wear behavior of 42CrMo4 steel/ZrO2 composite with 10 and 30 ppi performed ceramic and compare it with the un-reinforced steel under different applied loads. The composite ...

Mechanical properties of dissimilar weld joints between GOST09ch16N4B (a martensitic stainless steel) and AISI 4130 thin sheets made by gas tungsten arc welding (GTAW) were studied using ER410NiMo and ER100S-G filler metals ...