Volume 5, Issue 1

 

ارسال های اخیر

  • An Investigation on the Reduction of Iron Ore Pellets in Fixed Bed of Domestic Non–Coking Coals 

    Amini Mashhadi, H.؛ Rastgoo, A.؛ Vahdati Khaki, J. (Iron & Steel Society of Iranانجمن آهن و فولاد ایران, 2008-06-01)
    In this study, the isothermal reduction of iron oxide pellets, made of Iranian Chadormalo, Gole-gohar, and Sangan iron ores, was investigated in the temperature range of 900-1100°C. Tabas, Pabdana, Babnizoo, Karmozd, and ...

  • Physical Modeling of Steel Delivery during Thin Slab Continuous Casting 

    Meratian, M.؛ Hadjari, A. (Iron & Steel Society of Iranانجمن آهن و فولاد ایران, 2008-06-01)
    A full scale physical model of a thin slab caster with a four-hole design submerged entry nozzle (SEN) was constructed. On the basis of the dimensionless Reynolds and Froude similitude criteria, the fluid flow in a full-scale ...

  • Factors Affecting Weldability Improvement of Dissimilar Welds of Aged HP Stainless Steel and Alloy 800 

    Dehmolaei, R.؛ Shamanian, M.؛ Kermanpur, A. (Iron & Steel Society of Iranانجمن آهن و فولاد ایران, 2008-06-01)
    The microstructure of HP stainless steel in aged and aged + solution annealed conditions and solutionized alloy 800 was characterized by optical microscopy, scanning electron microscopy (SEM), and transmission electron ...

  • Using Scrap Tires in EAFs as a Substitute for Carbon 

    Joulazadeh, M. (Iron & Steel Society of Iranانجمن آهن و فولاد ایران, 2008-06-01)
    EAF plants normally consume coal and coke as reactants, alloying elements, or fuel. The price of these materials varies from € 0.20-0.35/kg. This is while nearly 10 million pieces of tires are annually discarded in Iran. ...

  • Simulation of Temperature Distribution in a Continuous Tunnel Reheat Furnace Using the Monte Carlo Method 

    Safari, M.؛ Saboonchi, A. (Iron & Steel Society of Iranانجمن آهن و فولاد ایران, 2008-06-01)
    A mathematical model of a continuous reheating furnace has been developed to identify the design and operating parameters that significantly affect furnace performance. In this study, the furnace is modeled 3 dimensionally ...