Volume 3, Issue 1
مرور بر اساس
ارسال های اخیر
-
Effect of Interlaminar Weak Bonding and Constant Magnetic Field on the Hygrothermal Stresses of a FG Hybrid Cylindrical Shell Using DQM
(Bu-Ali Sina University, 2018-09-01)In the present article, the influences of interlaminar bonding imperfection and constant magnetic field, as well as hygrothermal environmental conditions, on the stresses and displacements of a cylindrical shell with surface ...
-
Span Length Effects on the Progressive Collapse Behaviour in Concrete Structures
(Bu-Ali Sina University, 2018-09-01)Progressive and general collapse of structures are extremely able to cause great casualties and financial losses. Accordingly, evaluation the performance of structures after losing primary elements is of great importance ...
-
The Effects of Geometric Parameters Under Small and Large Deformations on Dissipative Performance of Shape Memory Alloy Helical Springs
(Bu-Ali Sina University, 2018-09-01)This paper presents an investigation into shape memory alloy (SMA) springs considering the effects of geometry changes under small as well as large deformations. Helical springs were fabricated by shape setting of NiTi ...
-
The Role of Wheel Alignment Over the Fatigue Damage Accumulation in Vehicle Steering Knuckle
(Bu-Ali Sina University, 2018-09-01)The present paper investigates the effect of changes in wheel primary angles such as Camber and Toe angles on the fatigue life of vehicle steering knuckle under multi-input random non-proportional 3D stress components. In ...
-
An Experimental Investigation into Wear Resistance of Mg-SiC Nanocomposite Produced at High Rate of Compaction
(Bu-Ali Sina University, 2018-09-01)The Mg-SiC nanocomposite specimens were produced at low strain rate of 8×10−3s−1 using a universal INSTRON testing machine, strain rate of about 8×102s−1 using a drop hammer and at strain rate of about 1.6×103s−1 employing ...
-
The Prediction of Weld Line Movement in Deep Drawing of Tailor Welded Blanks
(Bu-Ali Sina University, 2018-09-01)Tailor welded blanks (TWBs) include welded metal sheets, for the purpose of obtaining the desired structure of materials, decreasing product weight and increasing process flexibility and efficiency. Weld-line movement ...
-
Formation of Micro Shear Bands During Severe Plastic Deformation of BCC Alloys
(Bu-Ali Sina University, 2018-09-01)In this work, tendencies of pure Niobium, Fe-20Cr stainless steel, and Ti-36Nb-2Ta-3Zr to formation of micro shear bands inside their microstructures during severe plastic deformation are compared with their mechanical ...
