In this paper, a new methodology has been proposed to enhance the conformal mapping applications in the process of optimum trajectory planning in Terrain Following (TF) and Terrain Avoidance (TA) Flights. The new approach ...

This work systematically investigated the effects of process parameters on the technological responses, including the tensile force TF and average micro hardness AMH in the gas tungsten arc welding (GTAW) of titanium. ...

Cavitation Phenomenon in Centrifugal pumps is the main cause of failures in pump components, such as impeller and volute. To evaluate this phenomenon, firs of all the flow field in a BB2 API multistage centrifugal pump ...

In the present paper, an exact mathematical solution has been obtained for nonlinear free transverse vibration of beams, for the first time. The nonlinear governing partial differential equation in un-deformed coordinates ...

The aim of this research was to provide a simple yet realistic model of the sino-nasal tissue as a major requirement for developing more efficient endoscopic neurosurgery simulation systems. Ex-vivo indention tests were ...

Surface pressure distributions and boundary layer profiles are measured over the nose surface of a submarine model in a wind tunnel. The tests are conducted for two different nose shapes in order to study the effects of ...

In this study, Mg-Sn alloys were produced through the powder metallurgy (P/M) method by adding Sn in different ratios into Mg powder. A new mixing technique has been used in production to prevent the disadvantages of high ...

This paper aimed at developing an empirical correlation for heat transfer from a protruded surface in the presence of a cross-flow jet. Finite volume method has been used to solve the governing differential equations for ...

The nonlinear dynamic response, Limit Cycle Oscillations (LCOs), of high aspect ratio wings using a novel indicial aerodynamics in subsonic flow is investigated. Using the nonlinear beam theory, the structural model is ...

Insulator-based dielectrophoresis is a recently developed technique in which insulating posts are used to produce non-uniformity in the electric field in a microchannel. This study presents the effects of insulating posts ...

In this study Electrical discharge machining (EDM) process, widely used in mold manufacturing, is modeled and optimized using artificial neural network and an optimization heuristic algorithm. Material removal rate (MRR), ...